Topo Rear Window Triangle Overlay (Printed Series) - 2021+ Bronco 4 Do

Additional protection, covers up discolorations
Beautifully designed topographic contour lines
Easy to apply
Fits ALL 4 door 2021+ Broncos

2021+ Bronco Topographic Rear Window Triangle Overlay (Printed Series)

These printed rear door triangles cover up an area that is subject to discoloration like many of the pieces on the sides of the vehicle.

Fits ALL 4 door 2021+ Broncos. Matte finish.

2 pieces:

Left Rear Door
Right Rear Door

Features

TruProtect - UV Resistant Laminate
TruPrint - Authentic Roland inks and printers
Made in the USA

Customization

While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.

Military Themed
Patriotic
Other organizations

Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.

Use our contact form to get in touch with us.

INSTALLATION

You will want to do this in 80-85 degree weather ideally. Stay in the shade unless it is a little on the cool side. Make sure the vinyl is flat before installation.

Recommended items:

This Kit (overlays)
Microfiber
Detailer spray to prep the area (without wax)
Optional Heat gun or hair dryer

We recommend doing this after a fresh car wash. Re-clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the door triangle. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. You can use an alcohol wipe on the edges. Allow area to dry.

Do a dry install. This material is pretty forgiving if installed under the right temperatures. Align the vinyl. Then push out the air carefully as to prevent creasing. Just use your fingers as the piece is small.

The adhesive reacts to PRESSSURE and HEAT.